Installing a Rain Gutter:

1. Level the installation position of the rainwater tank, and use ink to stretch the thread from the beginning to the end. 2. Take out the rainwater gutter from the packaging bag, place the rainwater gutter smoothly on the ground or on the scaffold, and install the rainwater bucket horizontally under the rainwater gutter, and use a cutting machine to cut a hole the same size as the water outlet of the rainwater bucket.

3. Slowly insert the rainwater bucket into the rainwater tank to the launching position.

4. Install the hanger on the rainwater tank; insert it in sequence and master the spacing, and the distance between two adjacent hangers is 40~45CM;

5. Use an electric drill (No. 6 drill bit) to drill holes at a distance of 40~45CM at the position of the elastic line, and knock into the expansion pipe.

6. Place the rainwater gutter in the position where the wire has been stretched, adjust the spacing of the "hanger", and then use ∮4X40 stainless steel screws to fix the hanger and the rainwater gutter.

7. When encountering the corner of the rainwater gutter, it is necessary to use the "clamp connector" to connect the "external corner" and "inner corner", and the connection part between the rainwater gutter and the rainwater gutter also needs to use the "clamp connector" to connect.

8. During the installation of the rainwater tank, in order to prevent water leakage, glass glue and PVC glue must be applied to the corresponding accessories such as the locker and the clip. Precautions clogged gutters can lead to leaking water back into the house. Clogged gutters can also cause standing water to build up, allowing mosquitoes to breed, as well as allowing grasses and weeds to grow in the gutters.